Common Problems on Dell Inspiron 1525 Hackintosh

**THIS POST IS OUTDATED PLEASE REFER TO THE SNOW LEOPARD GUIDE**

I’ve created this page to solve a lot of the common problems that people have had throughout the duration of this site.

To start, I’m going to write this using osx86tools created by pcwiz, you can download it here

http://pcwizcomputer.com/osx86tools/

It’s important to remember to check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks” in OSX86tools on a lot of these steps.

You Have No Wi-Fi: To get your wifi going run this patch broadcom patch and if that doesn’t work download this broadcom-script and open up terminal and type “sudo -s” without the quotes and drop the broadcom script into the terminal and press enter and go through the prompt. After this open up osx86tools and check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks”

You Have No Sound: To get sound download sound_fix and then open “osx86tools” and install both AppleHDA.kext and HDAEnabler.kext and then check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks”

If this doesn’t work you can download this dailyblogged_fix which was posted over at http://www.dailyblogged.com/275/near-perfect-audio-with-latest-applehda/ To run it you have to open the AppleHDAPatcherv1.20 and drag the 1525_codec onto it. After this open osx86tools and check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks”

My Sleep Doesn’t Work: To get your sleep working download this sleep_fix (Made by Slice and the Voodoo team) and then open osx86tools and install both kexts and then check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks” and shutdown and boot with “-f” without the quotation marks.

My Shutdown Doesn’t Work: This is a problem when booting on battery power that I have yet to figure out. Two possible solutions that might work are as follow

You can open osx86tools and install OpenhaltRestart.kext made by Psystar.

Or you can try and follow the You Have No Sound part of this post and try both of them see if those fix it.

My Card Reader Doesn’t Work: To get your card reader working download IOPCIFamily.kext made by Slice and then open osx86tools and install the kext and then check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks” and shutdown and boot with “-f” without the quotation marks.

My Bluetooth Isn’t Recognized/Won’t turn off and on: To Get your bluetooth recognized and with the ability to turn it off and on. Download bluetooth_fix the IOBluetoothFamily.kext was modified by Zoharxero to get turn on/off capability and the applesmbios is by anV. To install open osx86tools and install the kexts and then check “Repair Permissions” “Set Extension Permissions” and “Clear Extensions Cache” and press “Run Selected Tasks” and shutdown and boot with “-f” without the quotation marks.

Please Post other Common Problems that should be addressed and I will do my best to get around to them.

  1. Junaid Raza says:

    I have a problam i have updated the Airport Driver and it now id didn’t detect the wifi card is there any way i can undo that update to maker my airport work fine again or i have to install the mac again.

    ReplyReply
  2. cody says:

    hey, i tried installing your wifi and sound fix’s, but when it asks me for my password, it says its incorrect. its says im getting my admin password wrong. so i realized, maybe somehow i am not set as the admin user. how can i make myself the admin? i finally got my hack working, and i found your stuff that looks like its what i need, but i cant install it! please help.

    ReplyReply
  3. Hello! I really love to read your articles. I am reading your articles whenever I have some time left

    ReplyReply
  4. napster says:

    Hi..

    It works on my DELL 1525…..

    can you please HELP me how to connect using USB wifi realtek IN mac OSX? Actually, Im connected in Realtek Wireless Utility BUT, I can’t connect to INTERNET and when I tried to use airport for wifi rtl I cant detect which is the distance from from the router to my room is 5meters.

    PLEAAASE HELP ME HOW TO CONNECT……………………….

    Can you please send the STEPS to my email: coe_napenas@yahoo.com

    YOUR REPLY IS REALLY APPRECIATED VERY MUCH….. THANK YOU IN ADVANCE

    ReplyReply
  5. Neil Fox says:

    hey while installing iAtkos, i come to the part where i have to register, but my keyboard doest work. I am on a Sony Vaio FW series laptop.

    Please help

    ReplyReply
  6. Lapeno says:

    hello, install snow leopard, with Mac OS X 10.6 Snow Leopard Retail Install Boot-132 Method, I have no wifi, I tried to repair it with the steps explained here, but even so I still wifi, I do?

    sorry for my bad English

    ReplyReply
  7. dzwiedzislaw says:

    HELP! I did an update (i know, I know… don’t judge me :) ) and now after restart and dell bios booting screen i have blinking line and thats it! I have dell inspiron 1525.

    ReplyReply
  8. nap says:

    @Lapeno:

    hi you need to download realtek 6.0 version for your leopard 10.6.0 I guess……

    in my dell 1525 I have leopard 10.5.7 and I installed 5.7 realtek version for mac osx..

    hope it will fix your problem..

    you can add my yahoo id– ninyonapenas@yahoo.com

    buzz me if you need something to know..

    ReplyReply
  9. nap says:

    @Junaid Raza:

    hi u need to install your ketxt for wifi…..

    its downloadable….

    i forgot the site but you can google it.

    ReplyReply
  10. nap says:

    @Neil Fox:

    there is a problem with your installation… you have to check on the installation steps the fixkeyboard(if im not mistaken.)…

    try to google it on configuration….

    ReplyReply
  11. dzwiedzislaw says:

    Forget it… Somehow I did an update when I was trying to install new printer. You know… I was installing the drivers and there was a good fight on TV and the dinner and the Update popup jumped out so why not… :) Now after i removed the USB cord from laptop it booted normally. Maybe it’s some kind of the compatibility issue. So I guess i will have to hook it up to my other computer and print through network. Thanks anyway. I love this website!!!

    ReplyReply
  12. white tiger says:

    i have a problem
    i have a black screen after apple splash when trying to install mac 10.6.2

    ReplyReply
  13. Alexander Brown says:

    How do you enable “tap to click” on leopard 10.5.2? There is no trackpad preference pane, so how do I do it?

    ReplyReply
  14. FreeBurma says:

    Editing your trackpad preference pane as per: http://forum.voodooprojects.org/index.php/topic,245.0.html is a good place to start. Specifically:


    open /System/Library/PreferencePanes/Trackpad.prefPane/Contents/Info.plist and remove this line

    VendorID
    1452

    ReplyReply
  15. FreeBurma says:

    Just after hitting submit it dawned on me that in 10.5.2 you don’t have a trackpad preference pane. As I remember it is all in one preference pane along with the mouse settings. The idea stays the same you just have to root around a little to find it…

    ReplyReply
  16. napster says:

    @Lapeno:

    Hi about wifi, which one?airport or realtek? if airport you need to download a driver version 10.6.2 and also for realtek. you cannot use the airport though the aport is already installed. the version of your airport must be compatible with your system..
    I hope it will help you or you can uninstall your airport driver and reinstall again then update it to boot by typing -v

    ReplyReply
  17. napster says:

    @white tiger:

    A white tiger;

    before you install mac osx version 10.6.2 you must know the requirements first. I believed that updating or installing a mac version 10.6.2 to dell inspiron will make your system freezed. because when installing 10.6.2 your system must be higher that intel either a mac machine.
    i hope it will help a lot..

    bout black screen after booting the mac. i suggest you put a login password. that is what i did to my inspiron 1525…

    i used mac osx version 10.5.7 to dell inspiron 1525..

    compatibility is always the problem.

    ReplyReply
  18. Alexander Brown says:

    Never mind, I fixed my trackpad! I now have tap to click. LOVING my HackBook Pro.

    ReplyReply
  19. frog says:

    how do you install the sound fix

    ReplyReply
  20. fiel says:

    @frog:

    hi

    download the sound fix, you can find the software to this page. email me if you solve it.. you can have my ym if you want to ask more about mac os..
    ninyonapenas@yahoo.com

    ReplyReply
  21. frog says:

    @fiel:
    what do you do after you download it?

    ReplyReply
  1. There are no trackbacks for this post yet.

Leave a Reply


Mac Your PC is Digg proof thanks to caching by WP Super Cache